TARPTUBE
​
SECURING THE BOAT PERSENING
patent pending
TARPTUBE IS NEW !!
Tarptube makes it easier to secure the boat cover.
Tarptube replaces sandbags or water canisters on the boat cover.
Attach ordinary flat hoses to the lower edge of the tarpaulin and fill with water.
The tarpaulin is weighted and stabilized over the entire length of the boat.
Drain the water in spring - done
TARPTUBE ON THE PERSENNING
ON THE ENTIRE LOWER EDGE
NO WATER CANISTERS
The collection of old canisters is out
WATER CAN
OFTEN ONLY HAVE ONE SEASON
UNSTABLE
THE ALTERNATIVE
SIMPLY ATTACH TARBTUBE
WITH CABLE TIES OR PAMPING
AND FILL WITH WATER
GOOD STABILITY ALL OVER THE LOWER EDGE OF THE PERSENNING
PERFECT !!
SAME WEIGHT AS THE WATER CANISTER
FILL IN FRONT - BLEED AT THE REAR
FILL
BLEED
ASSEMBLY INSTRUCTIONS
TARPETUBE IS EASY TO INSTALL
SHORT FLAT HOSE TO THE LENGTH OF THE PERSONAL (2X)
CONNECT TARBTUBE CONNECTOR (2X)
LOOSELY CONNECT THE FLAT HOSE
CONNECT THE WATER HOSE
CONNECT VENTILATION
FLAT HOSE
2 TARBTUBE CONNECTORS
2 HOSE COUPLINGS
4 STAINLESS STEEL HOSE CLAMPS
TAPE
TARPTUBE FITTING MOUNTED
LOOSELY CONNECT TARPTUBE
CONNECT THE WATER HOSE
BLEEDING HOSE
CONNECT
BLEEDING HOSE
HANGING UP
FILL WITH WATER
Important : use stop hose couplings
Fill with water from one side
Hang up the vent line at the other end
Fill carefully!
Disconnect lines
IF REQUIRED, ADD TOX-FREE TANK FREEZE
WELL FILLED
ALIGN THE TARPTUBE ON THE LOWER EDGE OF THE PERSENNING
READJUST ROPES
ROPES ARE IDEAL FOR FASTENING
GOOD CIRCULATION AND BALANCE
TARPTUBE STABILIZED
THE ENTIRE LOWER EDGE OF THE PERSENNING
WELL DISTRIBUTED WEIGHT
PERFECT !!
TARPTUBE CONNECTION
Tarptube sockets are made of Epoxy Compsite
Highly resilient and frost-proof to below minus 30 gr Celsius
Tarptube has a step connector for 50 mm and 2 inch hoses
The thread in the cover (M 27 x 1.5) corresponds to that of the most common hose couplings
Mount the stop hose coupling with an O-ring or sealing compound
SLIDE THE TARPETUBE CONNECTOR INTO THE HOSE
APPLICATION PRINCIPLE
ALIGN
APPLY HOSE
TAPE LAGE FOR PROTECTION
8 ROUNDS !!
TIGHTEN THE HOSE CLAMP
SCRATCH PROTECTION
STEP CONE 50 MM AND 2 INCHES
M 27 X 1.5 FEINWEINDE
THE ORDINARY
HOSE COUPLINGS FIT
READY SCREWED ON WITH SEALING COMPOUND
SAFETY NOTICE
Tarpetube is new and there is still little experience in using it.
Use is solely the responsibility of the user.
Securing the cover / tarpaulin and the object to be protected is the responsibility of the user.
Measures to protect the weight medium from freezing are recommended,
For example, adding antifreeze ("poison-free for water tanks") , connecting heating cables or backing the hose to the object.
The alternative !
Tarptube center
Tarptube center
With Tarptube center r, the hose couplings are in the middle of the boat
The flat hose is integrated into the lower edge of the tarpaulin -
or
the lower edge of a PVC tarpaulin is welded twice and the hose couplings are connected directly.
A hose coupling for filling
A hose coupling for venting with internal venting hoses
TARPTUBE CENTER
INTEGRATED INTO
PVC PERSENNING
OR CANVAS PERSENNING
Ventilation lines inside
COMING SOON FOR SALE
SALE WITH AND WITHOUT HOSE COUPLING
online-shop
order here: info@tarptube.no
